Anet A8 Print Speed Settings, Explained In Detail

For your print to be perfect and smooth, the speed of the print has to be accurate. A slight miscalculation will cost you more time and money. Fortunately, 3D printers allow speed adjustments to increase your print quality while reducing the time taken for production.

Traditional printers had only a one-speed setting. Luckily, many brands make printers with a speed setting due to technological advancement.

Among the best printers with speed, settings are Anet A8 Print Speed. By the end of this article, you will be able to adjust the rate on your 3D printer and find the ideal print speed for Anet A8.

What is the ideal Anet A8 Print Speed?

Anet A8 3D printer is among the best and most affordable printers with adjustable print speed. The printer has a large volume of 300x 220 x 220 mm.

 The large volume accommodates fast printing speed. Anet is 30 percent faster than standard printers.

The printer has a range setting to adjust to achieve the right speed. For a perfect print using Anet A8, the normal range is between 30 and 60 mm/s. While the print speed of 3D is 180mm/s. A few things influence the rate of the printer;

  • When printing large images, your printer needs to print a little faster.
  • Colored documents will require higher resolution and speed than black and white ones.
  • Some paper qualities cannot accommodate high speed while others do.

Adjusting speed on the 3D printer is not hard. Watch the step-by-step video tutorials.

Selecting the perfect printing speed in Anet A8.

Everything takes experience. If you are not an experienced hobbyist, you might have difficulty adjusting your print size. You might end up getting imperfect prints. Avoid consulting the internet on operating your printer before reading the user manual.

Some printers may have modifications that interfere with speed. Below are a few tips you should follow when finding the ideal speed range for your 3D printer.

1. Have a little patience with the process.

It is impossible to understand a machine for the first few days fully. Therefore, you will have to go through the learning curve before graduating to customize speed.

2. Do not adjust your print speed too high.

Usually, the ideal speed range of an Anet A8 is between 30mm/s on the lower end and 180mm/s on the upper side. Do not attempt to go up to 150mm/s if you are a beginner.  

Hobbyists are conversant with the process, and they can push to 200mm/s without damaging the print.

  • Using high speed may cause warping of the print.
  • On the other hand, low speed may disfigure the print.

3. Settle on the best superior speed.

Play with speed setting until you settle on the best speed. For a perfect print with balanced saturation, warmth, and brightness, you are recommended to use a rate of 60mm/s.

After finding the ideal speed, you can adjust other settings to achieve a perfect print.

4. Modify your hardware

If you want to use high speed on your Anet A8, you should consider modifying your hardware.

You can also swap the filament and use one which does not warp or break at high speed. Check on PETG VS. Nylon filament.

At high speed, the frame tends to get distorted. You can buy a metal frame. A8 is open source and accommodates any modification.

5. Choose the right software and Firmware

There are quite a several 3D software and 3D Firmware. The quality of the two affects your printing project.

You cannot use high speed while using weak software. Your printer might crash. Therefore, you should also use Firmware that is adaptable to enjoy high-speed printing.

Limitations using high speed on the Anet A8 printer

  • When you use high speed on an Anet A8, the layers of the material used for printing will not stick together. Choose a filament with good adhesion and can withstand high temperatures.
  • Anet A8 printer has a low-cost frame build. However, when used at high speed, much heat is emitted. You can choose metal frames to avoid that issue.

Frequently Asked Questions (FAQs)

  • Does the Anet A8 printer come with compatible software?
    No. you can research the best software to use on Anet A8, depending on your project. There are free and paid softwares downloadable on the internet.
  • Which filament is used on Anet A8?
    There are several types of filaments in the market. The best are Nylon and PETG 3D filaments. Have proper research on the ideal filament to use on your 3D printer.
  • Is Anet A8 a fire hazard?
    The low-grade components of the Anet A8 make it ire hazardous. However, you can buy the latest high-quality Anet A8 with advanced features to avoid fire. Alternatively, you should print at an optimum speed to prevent overheating the components.
  • What is the bed size on Anet A8?
    The largest bed size for an Anet A8 is 20 x 220 x 240mm. You can custom use any filament that is compatible with your printer. Anet A8 is compatible with Nylon, ABS, PLA, and many others.

Related: Anet ET4 pro 3D Printer review

Conclusion

 Anet A8 is a DIY printer; you have to connect the components yourself. It takes a lot of time to assemble all the parts. Despite the printer being DIY, it is among the few printers with speed adjustment settings.

People with printing experience like playing around with settings and still producing a smooth finish. However, for beginners, try using a low speed of below 60mm/s. High speed will distort your material.

When using an Anet A8 printer, use high-quality filament, software, and Firmware. All those factors will affect the quality of your print.

The 3D printer has a glass bed that effectively increases the print speed.

Anet A8 3D printer is open source. Several modifications are done to the machine. First, make sure you read the user manual for efficient printing. After several trials and errors, you will finally figure out the perfect print speed on Anet A8.

Leave a Comment