Indeed, the nozzle size can make a huge difference in your print quality as it impacts flow rate. But do you know what size nozzle comes with Ender 3?
0.4mm size is the best nozzle for ender 3. However, If you want to print large and more detailed objects, you will need to purchase a larger nozzle and an adapter. In contrast, if you’re looking for a small material, you must choose a size smaller than 0.4.
Here, I’ve shared the nozzle size chart after doing research, including the pros and cons of both larger and smaller nozzles. So let’s know about the ins and outs straight away!
The List of Different Nozzle Sizes for Ender 3:
Here are a few nozzle sizes for your Ender 3 printer:
| ender 3 nozzle size | |
|---|---|
| 0.2mm | best layer adhesion, good overhang |
| 0.3mm | too small and may cause clogs or delamination |
| 0.4mm | best results on small parts but need a fan to cool the plastic while printing due to the low flow rate of the nozzle |
| 0.5mm | almost the same quality as 0.2mm, you need to adjust your slicer setting to reduce the flow rate and print at a higher temp |
| 0.6mm | good for detail and small parts |
| 0.8mm | good for large parts |
| 1.0mm | good for large parts |
| 1.2mm | best nozzle for Bowden extruder |
What Size Nozzle Comes with Ender 3?
The Ender 3 is a multi-filament printer, which means that it uses a wide range of different materials for Printing. The larger the nozzle, the more excellent airflow you’ll have. Thus, less material can achieve a higher resolution.
If you only have access to one type of 3D printer, it is not sure that larger nozzles can give you better prints by the ender three default nozzle size. It will just increase your surface area, making your print look better when it’s done.
But when it comes to Printing with different types of printers, using a large nozzle size ender 3 will create much stronger parts.
The most popular nozzle types in the market are 0.4 mm, 0.5 mm, 0.6 mm, and 0.8 mm. There are also other, less-popular sizes, from 1.0 mm to 2.0 mm in the ender 3 nozzle diameter. If a filament is smaller than these values, it won’t fit the ender 3 printer’s nozzle.
What about Big Size Nozzle?
Which nozzle you will use will depend on what you will make using it. The large nozzle has its disadvantages with some advantages. So let’s get familiar with them:
- Pros of Having Larger Nozzle Size For 3D Printing
If you have an Ender 3 3D printer, you want a big nozzle to create robust and large parts without excessive print speeds. That’s why if you’re going to upgrade the nozzle on your machine, there are two styles of nozzles: small and large.
But what Ender 3 nozzle size works best? There aren’t specific measurements for these nozzles. But it’s safe to assume that either a 0.6mm or 0.8mm removable nozzle will give the best performance for printing something huge regardless of your Ender 3 layer height.
Bigger nozzles have more surface area and larger openings to fill faster than smaller ones. It helps when printing models with long thin surfaces like long bridges or things with many narrow perpendicular surfaces.
- Cons of Having Larger Nozzle Size For 3D Printing
Ender 3 uses 100% of the printer’s hardware, including an extruder with 16 nozzles in two banks. The large nozzle can also increase the risk of clogs and delamination.
However, Makers with Ender 3 can use standard materials that are commonly available, such as ABS or PLA, to print with smaller plastic nozzles.
What about Small Size Nozzle?
If you love to use small nozzles, you should also know about their good and bad sides:
- Pros of Having Smaller Nozzle Size For 3D Printing
There is a long discussion of the proper nozzle size with 3d printers, which may be unclear. Here’s a summary of the benefits of using smaller nozzle sizes on your prints.
The reducers take away any extra material that inverts near the filament during printing. Thus keeping your product immaculately clean and wrapped up before it’s even done being printed. The smaller nozzle provides finer layers as compared to a larger nozzle.
You can produce higher detail and have finer details. The smaller nozzle size will help you print faster since they are usually much faster. Sometimes it depends on if you use a heated bed or not.
- Cons of Having Smaller Nozzle Size For 3D Printing
The smaller the nozzle, the finer the motion needed to extrude material. This results in a smoother finish and less chance of clogs or jams.
However, the filament can cause to push out slower. The definition of ‘smaller’ is relative, as this will depend on your printer’s build size capacity.
Which Nozzle Size Is Best For You?
There’s a wide variety of filament types, so you may be wondering what the best nozzle size for your filament is. I’d recommend the 0.4 mm nozzle for Printing with PLA. It would be best not to use a larger nozzle than its size.
If you want to print more complex objects with plastic, look at the other types of nozzles for Ender 3. Your nozzle diameter is not a universal concept since its size depends on the printer and filament. The Ender 3 printer has the most common nozzle sizes among low-cost printers. Most users use 0.4 mm, 0.5 mm, 0.6 mm, and 0.8 mm.
The 0.4-mm nozzle is for printing small objects such as figures or creating high-quality low-poly models suitable for 3D Printing. Objects printed with this size nozzle do not require support structures during Printing. However, due to the small diameter of the filament, you can lay less plastic at once.
Final Words!
You already know what size nozzle comes with Ender 3 if you’ve gone through this entire article. The Ender 3 printer comes with a 0.4mm nozzle, the perfect size for most printing needs. That said, if you are looking for a more precise nozzle or need to print in a higher resolution, you can purchase a 0.2mm or 0.3mm nozzle separately; it’s all up to you!
Contents
