LulzBot TAZ 5 Desktop 3D Printer Review

Are you looking for a 3D printer to start your 3D printing journey? Then, there are so many options that you can try out. A pretty common option that comes along is the Lulzbot TAZ 5. Here, I have a Lulzbot TAZ 5 review that you can check out to get an idea of this printer.

It’s for those who are looking to learn about the features and quality of the Lulzbot TAZ 5 3D printer. This will give you the complete picture of the printer and help you understand whether the printer is worthwhile or not.

Before going into the depth, here’s a quick look at the ratings of different aspects of this 3D printer:

LulzBot TAZ 5 3d printer Performance Ratings
  • Ease-of-Use
  • Features
  • Value for Money
  • Durability
  • Printing
3.9

Summary

One of the best things about this LulzBot TAZ 5 3d printer is its compatibility with different materials.

LulzBot TAZ 5 Desktop 3D Printer Specifications

Now, let’s get through the product’s technical specifications in case you are looking for something in particular in your 3D printer.

  • Filament diameter: 3mm
  • Extruder type: Single extruder
  • Connectivity options: USB, SD card
  • Build volume: 11.7 x 10.8 x 9.8 inches
  • Printing speed: 200mm/s
  • Compatible materials: PLA, HIPS, PVA, Exotics, ABS
  • Weight: 42.85lbs

Going through the specifications gives you an idea of the technical ability, but it doesn’t give you the knowledge of how good or bad this 3D printer is.

LulzBot TAZ 5 Desktop 3D Printer Specifications

LulzBot TAZ 5 3D Printer Pros and Cons

Going through the pros and cons of the printer indeed clears up a bit of the printer for you. You can get an idea of the cons and see if something breaks the deal for you. Let’s get straight onto it, then.

Pros

  • The build area is quite large
  • It doesn’t have that many misprints
  • Usable with a variety of materials
  • You can use third-party filaments with this
  • Removing the prints is quite easy

Cons

  • There is a tricky setup process involved
  • It doesn’t come with any filament

To be honest, I don’t think these are some cons that can make it or break it for you. You still get a lot of benefits out of this printer. So, if you are still struggling to decide on the option, stay with me as I dive deep into this whole discussion.

Related: Best Nylon 3D Printer

Overview of LulzBot TAZ 5 Desktop 3D Printer

LulzBot TAZ 5 Desktop 3D Printer Overview

To be honest, I don’t think these are some cons that can make it or break it for you. You still get a lot of benefits out of this printer. So, if you are still struggling to decide on the option, stay with me as I dive deep into this whole discussion.

Here, I will take a look at the different aspects of this printer. Whether it’s the exterior or the performance, you will see how it performs in every aspect. Let’s get going with it.

What is the LulzBot TAZ 5 3D printer like physically?

When it comes to the printer’s looks, there is nothing truly fancy about it. It’s just like your regular 3D printer with similar kinds of looks. It has an exposed construction and doesn’t have any kind of cover on the printer either. So, there is a chance of damaging the printer from the outside.

However, the durability is still quite good on this one because of the materials they use. It’s pretty sturdy in terms of build quality. So, you don’t have to worry too much about the printer’s longevity or damage it that easily.

How is the LulzBot TAZ 5 used?

LulzBot TAZ 5 3D printer using

Now, the thing about using this printer is that you have to set it up properly before you use it. So, there is an assembly process involved, and you have to make sure that you are doing it correctly. Without the proper setup of the printer, you can’t even start using it, or you just end up with printing issues.

Other than that, there is nothing to worry about the software or the operation. The use of the printer is pretty straightforward, and you can easily start with it even as a beginner.

LulzBot TAZ 5 3D printer features

Lulzbot 3D printer performance

Not yet convinced? It’s okay; I have this list of features and their ratings on a scale of 5. This will surely help you decide whether the features are enough to satisfy your needs.

Print quality

Starting with the print quality, you get pretty decent results from the printer. It provides you with some good quality 3D printed models that you can easily use for smaller-end projects.

However, it doesn’t provide flawless prints. You will still end up with little flaws here and there.

Material compatibility

One of the best things about this printer is its compatibility with different materials. You can use quite a lot of materials with this printer. Whether you are trying to print ABS or PLA or PETG, or even HIPS, you can do that with this printer.

Also, the fact that any third-party filament works on the printer makes it a great choice just about for everyone. You won’t have to struggle with finding a particular filament model. That’s a pretty handy advantage to have.

Software use

The usability of the printer with different software is quite good as well. You can simply resort to the slicer software CURA to get your desired 3D printing operation. You can also try out other popular slicer software if you want, as it works out with them as well.

As for the usability, it’s not that difficult to do at all. You can easily use the printer without too much trouble as all the processes are pretty straightforward.

Print area

Something commendable in this printer is the build area it provides. The print area is quite impressive and offers you a lot of space for printing pretty large models. You won’t have any issues with it, and surely you will get a lot out of this printer in terms of printing larger models.

Conclusion

Summing everything up with this Lulzbot 3D printer review, I would say it’s a pretty good printer for the price. The printing results are satisfactory, and you wouldn’t have too many complaints about it.

So, if you are up to assembling and setting up the printer, this can be an excellent choice for you. It’s also a printer that’s worth your money. There is nothing fundamentally wrong with the printer, making it a solid pick for beginners.

Contents

Leave a Comment