Zortrax M200 3D Printer Review

Don’t mind spending money on quality stuff? Then, you will have a lot of different choices in front of you. I have the Zortrax M200 3D printer review, among many other options.

Zortrax M200 is a superb 3D printer if you are ready to bear the cost. But if you are looking for a budget option, this isn’t the pick for you. You can get through the details of this printer so you get the idea of the value.

Are you a rating kind of person? Then, I have got just the thing for you. Below you get to see the ratings of different factors of this printer.

Zortrax M200 3D Printer
Zortrax M200 3D Printer Performance Ratings
  • Print quality
  • Design and build
  • Print volume
  • Compatibility
  • Ease of assembly and use
4.4

Summary

Zortrax M200 is a superb 3D printer if you are ready to bear the cost.

These ratings don’t give you the details on how this printer performs, right? You get to see the numbers. So, I recommend you to get through this whole printer review for a better knowledge of the printer.

Zortrax M200 3D Printer Specifications

Sometimes your projects revolve around a specific feature or technicality. I have this table with all the necessary technical specifications you need to know about the printer for those scenarios.

  • Print area: 200 x 200 x 185 mm
  • Connectivity options: USB, SD card
  • Compatible materials PLA, ABS, Exotics, HIPS
  • Extruder type Single extruder
  • Filament diameter 1.75mm
  • Printing speed 100mm/s

This section is only suitable for those looking to get something specific out of their 3D printer. So, if you don’t find the specific technicality here, you can stop reading the review. But if it meets your needs, then get to the details and know more about the printer.

Zortrax M200 3D Printer Pros and Cons

Going through the pros and cons helps you out the most when deciding on a particular product. Below, you will learn about the pros and cons of the Zortrax M200 3D printer.

Pros

  • The printer provides you with consistent results.
  • It comes with a very iconic design as a 3D printer.
  • You can easily calibrate the printer bed without trouble
  • This printer is compatible with most third-party filaments
  • With the sleep mode on this printer, you can hope to save up some energy

Cons

  • There is a mild odor that you have to deal with on this printer
  • The software slice is a bit slow for regular usage of the printer

Related: Resin 3D Printers Reviews

Zortrax M200 3D Printer Overview

Zortrax M200 3D Printer overview

Well, at this point, you need to know how this printer can bring value to your 3D printing work. I will take you through all the details to understand that, so let’s get going.

What is the Zortrax M200 3D Printer like physically?

No matter what anyone says, when you look at the printer, you get the vibe of an expensive printer right away. The sleek design with the black finish makes it so classy and elegant that you will keep staring at it. And the finish on this printer speaks out high-end.

The printer is enclosed, so the printer’s internal components stay protected. It also adds up to the printer’s design with better protection. There is also an LCD controller on the front panel of the printer. Altogether, it’s a great design, and the build quality is awe-inspiring.

How is the Zortrax M200 3D Printer used?

One of the best things about this printer is that you don’t need to worry about any typical assembly on this printer. It comes pre-assembled, and you can start using the printer right out of the box. The calibration requires before printing is also straightforward to get through.

You get two connectivity options to use the printer: USB and SD card. You connect the printer to your computer and start the slicer software. Then, go on with your 3D printing as you would with any other 3D printer.

Who or which company is behind the Zortrax M200 3D Printer?

Zortrax is a well-regarded brand for all the 3D printer enthusiasts out there. They provide high-quality 3D printer equipment, which are high-end products for the most part. It means that they are not budget-friendly, but the quality of the 3D printers and gears is top-notch.

What sets the Zortrax M200 3D Printer apart from its competitors?

One of the best things that sets this printer apart from any competition is the consistency in the printing results. You can hardly mess up on this printer with the quality. Almost all the printed models from this printer provide excellent printing quality that you don’t get to see in the competition.

How has the Zortrax M200 3D Printer evolved from previous models?

This printer doesn’t have a previous model, so there is no upgrade or evolution that you see on the printer.

Zortrax M200 3D Printer Key Features

Zortrax M200 3D Printer features

Let’s end this whole discussion with the key features of this printer. I will also rate the features to understand the printer better.

Print quality

Well, I have been praising the print quality of this printer the whole time. There is nothing more to add. It provides accurate, reliable, and top-notch 3D print quality.

Design and build

Along with the print quality, the design and build are also commendable. It has an exquisite and classy design. The build quality is also quite sturdy and features protective measures.

Print volume

The print volume on this printer is commendable. It’s not the largest, but you still get to print some decent-sized 3D printed models with the 200 x 200 x 185 mm volume.

Compatibility

One of the best things about this printer is its compatibility with third-party filaments. It means you don’t always have to stick with the filaments from the manufacturers only.

Zortrax M200 3D Printer using

Ease of assembly and use

This printer doesn’t even require any assembly to start printing. Even the calibration process on this printer is much easier than other options out there.

Conclusion

Wrapping up the Zortrax M200 3D printer review, I have to say that it’s an excellent printer for almost anyone out there. Especially for professional purposes, you will love the printer because it will be worth all the money. However, as hobbyists or DIYers, the printer may be too expensive.

Leave a Comment